SFP+ Transceiver 10GBase-LR 1310nm 10KM SFP-10G-LR

$18.70
SKU STC-80030-SFP-10G-LR-1
Connector
Compatible
56 in stock

Free Shipping on orders over US$79

  • Media Type: Single-Mode Fiber (SMF)
    TX Wavelength: 1310 nm.
    RX Wavelenght: 1310 nm.
    Minimum Optical Budget: 9 dB
    Maximum Distance: 10km/20km
    Supported Data Rate: 1.25-10.31 Gbps
    Supported Applications: 10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps), STM-64 (9.95Gbps)
    DDM/DOM: Support
    Temperature Range: Standard 0°-70°C
    Connectors: Double LC
    Tx Wavelength Bandwidth: 100 nm (1260-1360 nm)
    Rx Wavelength Bandwidth: 100 nm (1260-1360 nm)
    Minimum Transmitting Power: -5 dB
    Maximum Transmitting Power: 1 dB
    Receiver Sensitivity: -14 dBm
    Receiver Overload: 0.5 dBm
    Dispersion: 140-160 ps/nm
    Transmitter Type: DFB Laser
    Receiver Type: PIN photodiode
    Power: +3.3V single power supply
    Chipset: MAXIM, MINDSPEED, SEMTECH
    Compliance: CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, RoHS, SFF-8431, SFP MSA
  • 10G-SFP-20 is Multi-Vendor MSA Compatible SFP+ (Small Form factor Pluggable) Transceiver, operating over Double Fiber Single-Mode Fiber (SMF) optical cable

    It has minimum guaranteed optical budget of 9 dB, with in most cases is enough to reach about 20 km distance. However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. This transceiver use top quality DFB Laser transmitter with operating at nominal wavelength 1310 nm. and 1310 nm. PIN Photodiode receiver.

    It support DDM/DOM optical diagnostics, with provide diagnostic information about the present operating conditions. 10G-SFP-20 operates in Standard 0°-70°C temperature range and has Double LC interface.

    Applications:

    • 10GBASE-LR/LW Ethernet
    • SONET OC-192 / SDH
    • 10G Fibre Channel
    • Supports 9.95 to 11.3Gb/s bit rates
    • Hot-Pluggable
    • Duplex LC connector
    • 1310nm DFB transmitter, PIN photo-detector
    • SMF links up to 10km
    • 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface
    • Power Supply :+3.3V
    • Power consumption<1.5W
    • Temperature Range: 0~ 70°C
    • RoHS compliant

Quality Certification

Please Note: Installing a third party transceiver does not void your network equipment warranty.

You recently viewed

Clear recently viewed