Availability:In Stock
|
Media Type: Copper Maximum Distance: 100m Supported Data Rate: 1000 Mbps Supported Applications: 1000Base-T Temperature Range: Standard 0°-70°C Connectors: RJ45 Chipset: MAXIM, MINDSPEED, SEMTECH, UX Power: +3.3V single power supply Compliance: CE, INF-8074i, RoHS, SFP MSA |
High-speed electrical interface, transmission line-SFP
| Host-SFP | ||||||
| Parameter | Symbol | Min. | Typical | Max. | Units | Notes/Conditions |
| Single ended data input swing | Vinsing | 250 | 1200 | mV | Single ended | |
| Single ended data output swing | Voutsing | 350 | 100 | 800 | mV | Single ended |
| Rise/Fall Time | Tr,Tf | 175 | psec | 20%-80% | ||
| Tx Input Impedance | Zin | 50 | Ohm | Single ended | ||
| Rx Output Impedance | Zout | 50 | Ohm | Single ended | ||
STC-FR-1000T 1000BASE-T copper SFP transceiver is high performance, cost effective module compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supporting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable.
The STC-FR-1000T supports1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modula-tion (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. The FR-1000T provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2-wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2-wire serial bus at address ACh.
Applications:
