1000BASE-T Copper SFP

$11.90
SKU STC-10003
Connector
Compatible
172 in stock

Free Shipping on orders over US$79


  • Media Type: Copper
    Maximum Distance: 100m
    Supported Data Rate: 1000 Mbps
    Supported Applications: 1000Base-T
    Temperature Range: Standard 0°-70°C
    Connectors: RJ45
    Chipset: MAXIM, MINDSPEED, SEMTECH, UX
    Power: +3.3V single power supply
    Compliance: CE, INF-8074i, RoHS, SFP MSA

    High-speed electrical interface, transmission line-SFP

    Host-SFP
    Parameter Symbol Min. Typical Max. Units Notes/Conditions
    Single ended data input swing Vinsing 250 1200 mV Single ended
    Single ended data output swing Voutsing 350 100 800 mV Single ended
    Rise/Fall Time Tr,Tf 175 psec 20%-80%
    Tx Input Impedance Zin 50 Ohm Single ended
    Rx Output Impedance Zout 50 Ohm Single ended
  • STC-FR-1000T 1000BASE-T copper SFP transceiver is high performance, cost effective module compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supporting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable.

    The STC-FR-1000T supports1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modula-tion (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. The FR-1000T provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2-wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2-wire serial bus at address ACh.

    Applications:

    • 1.25 Gigabit Ethernet over Cat 5 cable
    • Switch/Router to Switch/Router Link
    • High speed I/O for file severs
    • Up to 1.25Gb/s bi-directional data links
    • Hot-pluggable SFP footprint
    • Extended case temperature range (-40°C to +85°C )
    • Fully metallic enclosure for low EMI
    • Low power dissipation
    • Compact RJ-45 connector assembly
    • Detailed product information in EEPROM
    • +3.3V single power supply
    • Access to physical layer IC via 2-wire serial bus
    • Compliant with SFP MSA
    • Compliant with IEEE Std 802.3TM-2002
    • Compliant with FCC 47 CFR Part 15, Class B
    • RoHS Compliant Products

Quality Certification

Please Note: Installing a third party transceiver does not void your network equipment warranty.

You recently viewed

Clear recently viewed