10G BIDI 1330/1270nm 10km

$79.00
SKU STC-60071-10KM-1
Connector
Compatible
123 in stock

Free Shipping on orders over US$79

  • Media Type: Single-Mode Fiber (SMF)
    TX Wavelength: 1330 nm.
    RX Wavelenght: 1270 nm.
    Minimum Optical Budget: 8 dB
    Maximum Distance: 10km
    Supported Data Rate: 1.24-11.32Gbps
    Supported Applications: 10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps), 
    10G Fiber Channel (10.52 Gbps), 8G Fiber Channel (8.5 
    Gbps), 4G Fiber Channel (4.25 Gbps), 2G Fiber Channel 
    (2.125 Gbps), 1G Fiber Channel (1.0625 Gbps), STM-16
    (2.488 Gbps), STM-64 (9.95Gbps), ODU0 (1.244Gbps), 
    ODU1 (2.498Gbps), ODU2 (10.037Gbps), ODU2e 
    (10.399Gbps), OTU1 (2.66Gbps), OTU2 (10.70Gbps), 
    OTU1f (11.27Gbps), OTU2f (11.32Gbps), OTU1e 
    (11.049Gbps), OTU2e (11.095Gps)
    DDM/DOM: Support
    Temperature Range: Standard 0°-70°C
    Connectors: Single LC
    Tx Wavelength Bandwidth: 40 nm (1250-1290 nm)
    Rx Wavelength Bandwidth: 40 nm (1310-1350 nm)
    Minimum Transmitting Power: -6 dB
    Maximum Transmitting Power: 1 dB
    Receiver Sensitivity: -14 dBm
    Receiver Overload: 0.5 dBm
    Dispersion: 70-100 ps/nm
    Transmitter Type: DFB Laser
    Receiver Type: PIN photodiode
    CDR (Clock and Data Recovery) chip Supported
    Power: +3.3V single power supply
    Chipset: MAXIM, MINDSPEED, SEMTECH
    Compliance: CE, Class 1 FDA and IEC60825-1 Laser Safety 
    Compliant, INF-8077i XFP MSA Rev.4.5, RoHS
  • BIDI-10G-XFP is Multi-Vendor MSA Compatible XFP (10 Gigabit Small Form Factor Pluggable Module) Transceiver, operating over Single Fiber Single-Mode Fiber (SMF) optical cable. It has minimum guaranteed optical budget of 8 dB, with in most cases is enough to reach about 10 km distance.

    However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. This transceiver use top quality DFB Laser transmitter with operating at nominal wavelength 1270 nm. and 1330 nm. PIN Photodiode receiver.

    It support DDM/DOM optical diagnostics, with provide diagnostic information about the present operating conditions. BIDI-10G-XFP operates in Standard 0°-70°C temperature range and has Single LC interface.

    Applications:

    • 10GBASE-LR/LW Ethernet
    • SONET OC-192 / SDH
    • 10G Fibre Channel
    • Supports 9.95Gb/s to 11.3Gb/s bit rates
    • Hot-pluggable XFP footprint
    • Single LC for Bi-directional Transmission
    • Maximum link length of 10km
    • Built-in 1330/1270 WDM Filter
    • Uncooled 1330nm or 1270nm CWDM DFB Laser.
    • Power dissipation <1.5W
    • No Reference Clock required
    • Built-in digital diagnostic functions
    • Temperature range 0°C to 70°C
    • Very low EMI and excellent ESD protection
    • RoHS Compliant Part.

Quality Certification

Please Note: Installing a third party transceiver does not void your network equipment warranty.

You recently viewed

Clear recently viewed