10G BIDI 1550/1490nm 80km XFP Transceiver

$590.00
SKU STC-60071-80KM-1
Connector
Compatible
206 in stock

Free Shipping on orders over US$79

  • Media Type: Single-Mode Fiber (SMF)
    TX Wavelength: 1550 nm.
    RX Wavelenght: 1490 nm.
    Minimum Optical Budget: 23 dB
    Maximum Distance: 80km
    Supported Data Rate: 1.24-11.32Gbps
    Supported Applications: 10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps),
    10G Fiber Channel (10.52 Gbps), 8G Fiber Channel
    (8.5 Gbps), 4G Fiber Channel (4.25 Gbps), 2G Fiber
    Channel (2.125 Gbps), 1G Fiber Channel (1.0625 Gbps),
    STM-16 (2.488 Gbps), STM-64 (9.95Gbps), ODU0
    (1.244Gbps), ODU1 (2.498Gbps), ODU2 (10.037Gbps),
    ODU2e (10.399Gbps), OTU1 (2.66Gbps), OTU2 (10.70Gbps),
    OTU1f (11.27Gbps), OTU2f (11.32Gbps), OTU1e
    (11.049Gbps), OTU2e (11.095Gps)
    DDM/DOM: Support
    Temperature Range: Standard 0°-70°C
    Connectors: Single LC
    Tx Wavelength Bandwidth: 40 nm (1470-1510 nm)
    Rx Wavelength Bandwidth: 40 nm (1530-1570 nm)
    Minimum Transmitting Power: 0 dB
    Maximum Transmitting Power: 5 dB
    Receiver Sensitivity: -23 dBm
    Receiver Overload: -7 dBm
    Dispersion: 1600 ps/nm
    Transmitter Type: EML Laser
    Receiver Type: APD Photodiode
    CDR (Clock and Data Recovery) chip Supported
    Power: +3.3V single power supply
    Chipset: MAXIM, MINDSPEED, SEMTECH
    Compliance: CE, Class 1 FDA and IEC60825-1 Laser Safety
    Compliant, INF-8077i XFP MSA Rev.4.5, RoHS
  • BIDI-10G-XFP is Multi-Vendor MSA Compatible XFP (10 Gigabit Small Form Factor Pluggable Module) Transceiver, operating over Single Fiber Single-Mode Fiber (SMF) optical cable. It has minimum guaranteed optical budget of 23 dB, with in most cases is enough to reach about 80 km distance.

    However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. This transceiver use top quality EML Laser transmitter with operating at nominal wavelength 1490 nm. and 1550 nm. APD Photodiode receiver.

    It support DDM/DOM optical diagnostics, with provide diagnostic information about the present operating conditions. BIDI-10G-XFP operates in Standard 0°-70°C temperature range and has Single LC interface.

    Applications:

    • 10GBASE-LR/LW Ethernet
    • SONET OC-192 / SDH
    • 10G Fibre Channel
    • Supports 9.95Gb/s to 11.3Gb/s bit rates
    • Hot-pluggable XFP footprint
    • Single LC for Bi-directional Transmission
    • Maximum link length of 80km
    • Built-in 1550/1490 WDM Filter
    • Uncooled 1550nm or 1490nm CWDM EML Laser.
    • Power dissipation <1.5W
    • No Reference Clock required
    • Built-in digital diagnostic functions
    • Temperature range 0°C to 70°C
    • Very low EMI and excellent ESD protection
    • RoHS Compliant Part

Quality Certification

Please Note: Installing a third party transceiver does not void your network equipment warranty.

You recently viewed

Clear recently viewed