10G SFP+ DWDM CH23 1558.98nm 80KM
Media Type: Single-Mode Fiber (SMF) TX Wavelength: Ch. 23 (1558.98 nm) RX Wavelenght: ITU-T DWDM Grid 100 GHz C-Band Minimum Optical Budget: 23 dB Maximum Distance: 80km Supported Data Rate: 9.95-11.32Gbps Supported Applications: 10G Ethernet (10.31Gbps), STM-64 (9.95Gbps), ODU2 (10.037Gbps), ODU2e (10.399Gbps), OTU2 (10.70Gbps), OTU1f (11.27Gbps), OTU2f (11.32Gbps), OTU1e (11.049Gbps), OTU2e (11.095Gps) DDM/DOM: Support Temperature Range: Standard 0°-70°C Connectors: Double LC Tx Wavelength Bandwidth: 100GHz (0.8nm) Rx Wavelength Bandwidth: 1260 – 1620 nm Minimum Transmitting Power: 0 dB Maximum Transmitting Power: 5 dB Receiver Sensitivity: -23 dBm Receiver Overload: -6 dBm Dispersion: 1600 ps/nm Transmitter Type: EML Laser Receiver Type: APD Photodiode Power: +3.3V single power supply Chipset: MAXIM, MINDSPEED, SEMTECH Compliance: CE, Class 1 FDA and IEC60825-1 Laser Safety
DWDM-10G-SFP is Multi-Brand MSA Compatible SFP+ (Small Form factor Pluggable) Transceiver, operating over Double Fiber DWDM Single-Mode Fiber (SMF) optical cable. It has minimum guaranteed optical budget of 23 dB, with in most cases is enough to reach about 80 km distance.
This transceiver use top quality EML Laser transmitter with operating at nominal wavelength CH23 (1558.98 nm) and ITU-T DWDM Grid 100 GHz C-Band PIN Photodiode receiver.
It support DDM/DOM optical diagnostics, with provide diagnostic information about the present operating conditions. DWDM-10G-SFP+ operates in Standard 0°-70°C temperature range and has Double LC interface.
- 10GBASE-ER/EW Ethernet
- Sonet OC-192/SDH
- 10G Fibre channel
- DWDM Networks
- Supports 9.95 to 11.3Gb/s bit rate
- Compatibility:Multi-Vendor MSA Compatible
- Tx/Rx Wavelength: CH23 (1558.98 nm)/ ITU-T DWDM Grid 100 GHz C-Band
- Media Type: Single-Mode Fiber (SMF)
- Optical Budget: 23 dB
- Distance: 80 km
- DWDM EML transmitter, APD photo-detector
- Duplex LC connector
- Power Supply :+3.3V
- Power consumption<1.5W
- Temperature:Standard 0°-70°C