10G XFP 1310nm MM LRM 220M MSA Compatible

$45.00
SKU STC-60015
Connector
Compatible
201 in stock

Free Shipping on orders over US$79

  • Media Type: Multi-Mode Fiber (MMF)
    TX Wavelength: 1310 nm.
    RX Wavelenght: 1310 nm.
    Minimum Optical Budget: 6.2 dB
    Maximum Distance: 2km
    Supported Data Rate: 1.24-11.32Gbps
    Supported Applications: 10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps),
    10G Fiber Channel (10.52 Gbps), 8G Fiber Channel
    (8.5 Gbps), 4G Fiber Channel (4.25 Gbps), 2G Fiber
    Channel (2.125 Gbps), 1G Fiber Channel (1.0625 Gbps),
    STM-16 (2.488 Gbps), STM-64 (9.95Gbps), ODU0
    1.244Gbps), ODU1 (2.498Gbps), ODU2 (10.037Gbps),
    ODU2e (10.399Gbps), OTU1 (2.66Gbps), OTU2
    (10.70Gbps), OTU1f (11.27Gbps), OTU2f (11.32Gbps),
    OTU1e (11.049Gbps), OTU2e (11.095Gps)
    DDM/DOM: Support
    Temperature Range: Standard 0°-70°C
    Connectors: Double LC
    Tx Wavelength Bandwidth: 100 nm (1260-1360 nm)
    Rx Wavelength Bandwidth: 100 nm (1260-1360 nm)
    Minimum Transmitting Power: -8.2 dB
    Maximum Transmitting Power: 0 dB
    Receiver Sensitivity: -14.4 dBm
    Receiver Overload: 0.5 dBm
    Dispersion: 100-100 ps/nm
    Transmitter Type: DFB Laser
    Receiver Type: PIN photodiode
    CDR (Clock and Data Recovery) chip Supported
    Power: +3.3V single power supply
    Chipset: MAXIM, MINDSPEED, SEMTECH
    Compliance: CE, Class 1 FDA and IEC60825-1 Laser Safety
    Compliant, INF-8077i XFP MSA Rev.4.5, RoHS
  • 10G-XFP-2 is Multi-Vendor MSA Compatible XFP (10 Gigabit Small Form Factor Pluggable Module) Transceiver, operating over Double Fiber Multi-Mode Fiber (MMF) optical cable. It has minimum guaranteed optical budget of 6.2 dB, with in most cases is enough to reach about 2 km distance.

    However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. This transceiver use top quality DFB Laser transmitter with operating at nominal wavelength 1310 nm. and 1310 nm. PIN Photodiode receiver.

    It support DDM/DOM optical diagnostics, with provide diagnostic information about the present operating conditions. 10G-XFP-2 operates in Standard 0°-70°C temperature range and has Double LC interface.

    Applications:

    • 10GBASE-LRM Ethernet
    • 1200-Mx-SN-I 10G Fibre Channel
    • Other optical links
    • Type:XFP
    • Compatibility:Multi-Vendor MSA Compatible
    • Tx/Rx Wavelength: 1310 nm. / 1310 nm.
    • Media Type: Multi-Mode Fiber (MMF)
    • Optical Budget: 6.2 dB
    • Distance: 220M
    • Duplex LC connector
    • Data Rate: 1.24-11.32Gbps
    • Temperature:Standard 0°-70°C
    • Single power supply voltages : +3.3V
    • Power dissipation: <1.5W

Quality Certification

Please Note: Installing a third party transceiver does not void your network equipment warranty.

You recently viewed

Clear recently viewed