10G XFP CWDM 1490nm 80km

$375.00
SKU STC-60032-80KM-2
Connector
Compatible
240 in stock

Free Shipping on orders over US$79

  • Media Type:

    Single-Mode Fiber (SMF)

    TX Wavelength:

    1490 nm

    RX Wavelenght:

    1270-1610 nm

    Minimum Optical Budget:

    23dB

    Maximum Distance:

    80km

    Supported Data Rate:

    1.24-11.32Gbps

    Supported Applications:

    10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps),

    10G Fiber Channel (10.52 Gbps), 8G Fiber Channel

    (8.5 Gbps), 4G Fiber Channel (4.25 Gbps), 2G Fiber Channel

    (2.125 Gbps), 1G Fiber Channel (1.0625 Gbps), STM-16

    (2.488 Gbps), STM-64 (9.95Gbps), ODU0 (1.244Gbps),

    ODU1 (2.498Gbps), ODU2 (10.037Gbps), ODU2e

    (10.399Gbps), OTU1 (2.66Gbps), OTU2 (10.70Gbps),

    OTU1f (11.27Gbps), OTU2f (11.32Gbps), OTU1e

    (11.049Gbps), OTU2e (11.095Gps)

    DDM/DOM:

    Support

    Temperature Range:

    Standard 0°-70°C

    Connectors:

    Double LC

    Tx Wavelength Bandwidth:

    20nm (1460 – 1480 nm)

    Rx Wavelength Bandwidth:

    G.694.2 CWDM Grid (1270-1610nm)

    Minimum Transmitting Power:

    0 dB

    Maximum Transmitting Power:

    4 dB

    Receiver Sensitivity:

    -23 dBm

    Receiver Overload:

    -10 dBm

    Dispersion:

    1600 ps/nm

    Transmitter Type:

    EML Laser

    Receiver Type:

    PIN photodiode

    CDR (Clock and Data Recovery) chip

    Supported

    Power:

    +3.3V single power supply

    Chipset:

    MAXIM, MINDSPEED, SEMTECH

    Compliance:

    CE, Class 1 FDA and IEC60825-1 Laser Safety

    Compliant, INF-8077i XFP MSA Rev.4.5, RoHS

  • CWDM-10G-XFP is Multi-Vendor MSA Compatible XFP (Small Form factor Pluggable) Transceiver, operating over Double Fiber CWDM Single-Mode Fiber (SMF) optical cable. It has minimum guaranteed optical budget of 23 dB, with in most cases is enough to reach about 80 km distance.

    However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. This transceiver use top quality DFB Laser transmitter with operating at nominal wavelength 1490 nm and 1270-1610 nm PIN Photodiode receiver.

    It support DDM/DOM optical diagnostics, with provide diagnostic information about the present operating conditions. CWDM-10G-XFP-80-49 operates in Standard 0°-70°C temperature range and has Double LC interface. .

    Applications:

    • 10GBASE-ZR/EW Ethernet
    • Sonet OC-192/SDH
    • 10G Fibre channel
    • CWDM Networks
    • Type: XFP
    • Supports 9.95 to 11.3Gb/s bit rates
    • Compatibility:Multi-Vendor MSA Compatible
    • Tx/Rx Wavelength: 1490 nm / 1270-1610 nm
    • Media Type: Single-Mode Fiber (SMF)
    • Optical Budget: 23 dB
    • Distance: 80 km
    • Data Rate: 9.95-11.32Gbps
    • Temperature:Standard 0°-70°C
    • Power Supply :+3.3V
    • Power consumption<1.5W

Quality Certification

Please Note: Installing a third party transceiver does not void your network equipment warranty.

You recently viewed

Clear recently viewed