Menu

10G XFP CWDM 1510nm 80km

$375.00
SKU STC-60032-80KM-3
Connector
Compatible
7 days lead 7 Days Lead Time
  • Media Type: Single-Mode Fiber (SMF)
    TX Wavelength: Ch. 53 (1535.04nm)
    RX Wavelenght: ITU-T DWDM Grid 100 GHz C-Band
    Minimum Optical Budget: 23 dB
    Maximum Distance: 80km
    Supported Data Rate: 9.95-11.32Gbps
    Supported Applications: 10G Ethernet (10.31Gbps), STM-64 (9.95Gbps),
     
    ODU2 (10.037Gbps), ODU2e (10.399Gbps),
     
    OTU2 (10.70Gbps), OTU1f (11.27Gbps),
     
    OTU2f (11.32Gbps), OTU1e (11.049Gbps),
     
    OTU2e (11.095Gps)
    Support
    Standard 0°-70°C
    Double LC
    100GHz (0.8nm)
    1260 – 1620 nm
    0 dB
    5 dB
    -23 dBm
    DDM/DOM: -6 dBm
    Temperature Range: 1600 ps/nm
    Connectors: EML Laser
    Tx Wavelength Bandwidth: APD Photodiode
    Rx Wavelength Bandwidth: +3.3V single power supply
    Minimum Transmitting Power: MAXIM, MINDSPEED, SEMTECH
    Maximum Transmitting Power: CE, Class 1 FDA and IEC60825-1 Laser Safety
    Receiver Sensitivity:  
    Receiver Overload: PIN photodiode
    Dispersion: Supported
    Transmitter Type: +3.3V single power supply
    Receiver Type: MAXIM, MINDSPEED, SEMTECH
    CDR (Clock and Data Recovery) chip CE, Class 1 FDA and IEC60825-1 Laser Safety
    Power:  
    Chipset: Compliant, INF-8077i XFP MSA Rev.4.5, RoHS
    Compliance: CE, Class 1 FDA and IEC60825-1 Laser Safety
     
    Compliant, INF-8077i XFP MSA Rev.4.5, RoHS
  • CWDM-10G-XFP is Multi-Vendor MSA Compatible XFP (Small Form factor Pluggable) Transceiver, operating over Double Fiber CWDM Single-Mode Fiber (SMF) optical cable. It has minimum guaranteed optical budget of 23 dB, with in most cases is enough to reach about 80 km distance.

    However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. This transceiver use top quality DFB Laser transmitter with operating at nominal wavelength 1510 nm and 1270-1610 nm PIN Photodiode receiver.

    It support DDM/DOM optical diagnostics, with provide diagnostic information about the present operating conditions. CWDM-10G-XFP-80-51 operates in Standard 0°-70°C temperature range and has Double LC interface. .

    Applications:

    • 10GBASE-ZR/EW Ethernet
    • Sonet OC-192/SDH
    • 10G Fibre channel
    • CWDM Networks
    • Type: XFP
    • Supports 9.95 to 11.3Gb/s bit rates
    • Compatibility:Multi-Vendor MSA Compatible
    • Tx/Rx Wavelength: 1510 nm / 1270-1610 nm
    • Media Type: Single-Mode Fiber (SMF)
    • Optical Budget: 23 dB
    • Distance: 80 km
    • Data Rate: 9.95-11.32Gbps
    • Temperature:Standard 0°-70°C
    • Power Supply :+3.3V
    • Power consumption<1.5W

Quality Certification

Please Note: Installing a third party transceiver does not void your network equipment warranty.

You recently viewed

Clear recently viewed