Menu

1U Management 2-channel Optical Channel Protection Card

Features

  • Support 1+1 protection mode
  • Supports automatic switching and manual switching
  • Wide data rate of 8.5G~11.3Gbps support
  • 10GE
  • 10G SONET/SDH
  • 8/10Gbps Fiber Channel
  • Up to 2 data channels
  • Support 3R (Reshaping, Retiming, Reamplify) function
  • Support wavelength tunable optical module
  • Support LFP(link fault pass through)
  • Support SNMP-based network management
  • Support CLI, web, telnet and NMS(network management system)
  • Graded management mode (common user, super user or administrator)
  • ST8000 1U/6U chassis compatibility
Product Specification

STC8000 is a 1+1 OCP (optical channel protection) card for automatic protection of a particularly important service channel, enabling a higher availability and reliability for mission critical customers. On OCP transmitting side optical signals are transmitted to primary and secondary path simultaneously. On OCP receiving end, it selects primary path to receive optical signals when the primary link is up and switches to secondary path if primary link goes down. It is a cost-effective high-quality management system when plugged in 1U/6U chassis to implement device configuration, control and maintenance easily.

System parameters

Technical indicators

Data Rate (Gbps)

FC: 8.5Gbps /10Gbps

SONET OC-192, STM-64 (9.953Gbps)

10G WAN (10Gbps)

10G LAN (10.31Gbps)

10G POS

Optical interface type

Client side: XFP

Line side: XFP*2

Switching Time

Typical: 500ms(noise discriminator mode)

Min:35ms(noise discriminator OFF)

NMS

TELNET、SNMP、WEB

Size

OCP Card

26.5(W)× 195(H)× 252(D)

1U Chassis

482.6(W)x350(D)x43.6(H)

6U Chassis

482.6(W)x350(D)x261.6(H)

Power Consumption

≤20W

Quality Certification

Please Note: Installing a third party transceiver does not void your network equipment warranty.

You recently viewed

Clear recently viewed