Menu

OLP Optical Amplifiers

  • Parameter

    1:1

    1+1

    Wor Working wavelength nm

    1260~1610

    Monitoring Power range dBm

    +23~-50

    Monitoring power accuracy dB

    ±0.25

    Monitoring power resolution dB

    ±0.01

    Return loss dB

    ≥55

    PDL dB

    ≤0.05

    WDL dB

    ≤0.1

    Insertion loss dB

    TX<1.2, RX<1.2

    TX<4, RX<1.2

    Switching time ms

    <35

    <15

    Durability(Life) times

    >107

    OLP Module

    26.5(W)× 195(H)× 252(D)

    1-slot chassis

    482.6(W)x350(D)x43.6(H)

    8-slot chassis

    482.6(W)x360(D)x109(H)

    16-slot chassis

    482.6(W)x360(D)x261.6(H)

    Operating Temperature

    -10℃ ~ 60℃

    Storage Temperature

    -40℃ ~ 80℃

    Relative humidity

    5% ~ 95% Non-condensing

    Power Consumption

    ≤15W

  • Optical line protection system is combined of OLP-Optical Line Protection and operation maintenance terminal, it can realize optical power monitoring, optical line auto-switching and network management etc. In optical communication network, OLP monitors optical power of optical fiber and standby optical fiber at real time. In case the current optical power of optical fiber is less than pre-set switching threshold value, then alarm is on and it would switch to standby optical fiber automatically to protect optical transmission system line. OLP can provide a protection scheme for all routes and main lines easily with low cost, can protect all networks which needs optical line switching, all these above can make a optical communication network with no-block, high reliability, safety and high anti-disaster strength.

    Technical Specification

    • Reduce interrupt time of communication and improve maintenance efficiency with quickly recovering communication
    • Remarkably reduce damage to network caused by fiber failure
    • Increase network reliability and improve service quality
    • Harmless switch between working path and secondary path and convenient for line overhaul and cutover
    • Real-time monitoring power level of fiber Support remote control, easy management and maintenance
    • Transparent transmission

Quality Certification

Please Note: Installing a third party transceiver does not void your network equipment warranty.

You recently viewed

Clear recently viewed