Menu

XFP Transceiver 10GBase SR 850nm 300M XFP-10G-MM-SR

$26.00
SKU STC-60011
Connector
Compatible
135 in stock
  • Media Type: Multi-Mode Fiber (MMF)
    TX Wavelength: 850 nm.
    RX Wavelenght: 850 nm.
    Minimum Optical Budget: 4.6 dB
    Maximum Distance: 300m
    Supported Data Rate: 1.24-11.32Gbps
    Supported Applications: 10G Ethernet (10.31Gbps), Gigabit Ethernet
    (1.25 Gbps), 10G Fiber Channel (10.52 Gbps),
    8G Fiber Channel (8.5 Gbps), 4G Fiber Channel
    (4.25 Gbps), 2G Fiber Channel (2.125 Gbps), 1G
    Fiber Channel (1.0625 Gbps), STM-16 (2.488 Gbps),
    STM-64 (9.95Gbps), ODU0 (1.244Gbps), ODU1 (2.498Gbps), ODU2 (10.037Gbps), ODU2e (10.399Gbps),
    OTU1 (2.66Gbps), OTU2 (10.70Gbps), OTU1f (11.27Gbps),
    OTU2f (11.32Gbps), OTU1e (11.049Gbps),
    OTU2e (11.095Gps)
    DDM/DOM: Support
    Temperature Range: Standard 0°-70°C
    Connectors: Double LC
    Tx Wavelength Bandwidth: 20 nm (840-860 nm)
    Rx Wavelength Bandwidth: 20 nm (840-860 nm)
    Minimum Transmitting Power: -6.5 dB
    Maximum Transmitting Power: 1 dB
    Receiver Sensitivity: -11.1 dBm
    Receiver Overload: -1 dBm
    Dispersion: 110 ps/nm
    Transmitter Type: VSCEL Laser
    Receiver Type: PIN photodiode
    CDR (Clock and Data Recovery) chip Supported
    Power: +3.3V single power supply
    Chipset: MAXIM, MINDSPEED, SEMTECH
    Compliance: CE, Class 1 FDA and IEC60825-1 Laser Safety
    Compliant, INF-8077i XFP MSA Rev.4.5, RoHS
  • 10G-XFP-300 is Multi-Vendor MSA Compatible XFP (10 Gigabit Small Form Factor Pluggable Module) Transceiver, operating over Double Fiber Multi-Mode Fiber (MMF) optical cable. It has minimum guaranteed optical budget of 4.6 dB, with in most cases is enough to reach about 300 m distance.

    However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. This transceiver use top quality VSCEL Laser transmitter with operating at nominal wavelength 850 nm. and 850 nm. PIN Photodiode receiver.

    It support DDM/DOM optical diagnostics, with provide diagnostic information about the present operating conditions. 10G-XFP-300 operates in Standard 0°-70°C temperature range and has Double LC interface.

    Applications:

    • 10GBASE-SR/SW Ethernet
    • 1200-Mx-SN-I 10G Fibre Channel
    • Other optical links
    • Type:XFP
    • Compatibility:Multi-Vendor MSA Compatible
    • Tx/Rx Wavelength: 850 nm. / 850 nm.
    • Media Type: Multi-Mode Fiber (MMF)
    • Optical Budget: 4.6 dB
    • Distance: 300 m
    • Duplex LC connector
    • Data Rate: 1.24-11.32Gbps
    • Temperature:Standard 0°-70°C
    • Single power supply voltages : +3.3V
    • Power dissipation: <1.5W

Quality Certification

Please Note: Installing a third party transceiver does not void your network equipment warranty.

You recently viewed

Clear recently viewed